CNC pet furniture plans: house, feeder and bed
Furniture sized to your pet: a house with a raised floor and a lift-off roof, and a raised feeder with a bed. Measure your pet, set the sizes and preview the result in 3D.
More models are coming soon. Need something special? Ask us for a custom model, or see everything available now.
What to know before you cut
- These are plans, not certified products. Sand every edge, seal and finish the piece, and check that it suits your pet.
- For an outdoor house, use marine or phenolic plywood and seal every edge: MDF and particleboard swell with the first rain.
- Raise the house off the ground so it does not pick up moisture.
- Let the finish air out for a couple of days before your pet uses it.
Frequently asked questions
How do I size the door of the house?
The width of the chest plus a few fingers, and about three quarters of the height at the shoulder. For a cat, about 6 1/4" wide and 8" high (160 by 200 mm).
How high should the feeder be?
The height of the pet's chest, so that it eats standing without bending its neck.
Can I make the feeder and the bed separately?
Yes. Select the feeder, the bed or both in the measurements.
Is the finish safe for pets?
Choose a finish that is safe for animals and let it air out before use. Check the label of the product you use.
Related
- Free tool: Plywood fit test generator
- Guide: Plywood thickness for CNC furniture: why 3/4" isn't 3/4"
- Guide: Through-tenon vs half-lap joints in plywood furniture
- Guide: Best plywood for CNC furniture: what to buy and what to avoid
- Guide: How to finish and assemble CNC plywood furniture
- All furniture plans
Browse by type: Tables · Shelving · Seating · Home · Kids · Entryway · Office · Pets · Boxes & trays · Desk & organizers · Home decor · Christmas · Names & signs